Speedblock

NanoSpeed FL

Best conditions for use
All the HOLMENKOL Racing Finish products have not only outstanding gliding properties and high durability, they really work in a wide range of conditions, more wide than the following notes. Within the written conditions they suffice fulfil the requirements on highest level, means in World Cup or your personal fight.

TopSpeed PF wet: moist coarse and artificial snow, also new snow, 0 to –4°C.
TopSpeed PF mid: artificial snow an new and fine grained snow, –2 to –10°C.
TopSpeed PF cold: fine and coarse, dry snow, –5 to –15°C.
TopSpeed Paste 0/6: moist snow and rain or wet falling snow or watery track.
SpeedBlock wet: moist coarse and artificial snow, also new snow, 0 to –5°C.
SpeedBlock mid: artificial snow an new and fine grained snow, –2 to –10°C.
SpeedBlock cold: dry snow, –5 to –15°C
NanoSpeed FL wet: moist to wet, still grained snow, 0 to –2°C, marble snow (mirrorlike)
NanoSpeed FL mid: dry fine grained snow and artificial snow, –2 to –8°C.
NanoSpeed FL cold: new snow and grained snow, –2 to –15°C.

Racing Finish is the high end of ski preparation. TopSpeed PF, SpeedBlock, NanoSpeed FL and the proven TopSpeed Paste allow you extreme accelerations and highest speed due to the outstanding resistability also in long distances.
The Racing Finish line is devided into three categories wet, mid and cold. So all the conditions are covered and it is easy to decide and to use.

Use
TopSpeed PF
Sprinkle and work in with FinishKork or SpeedBrush Kork. For CrossCountry or Biathlon iron quickly and cork for long distances or if you have aggressive or wet snow. Be careful about the iron temerature (see label), to hot ironing may damage the powder or the ski.
After cool down brush exactly with horsehair brush and finally with BaseBrush Steel MicroFinish.

SpeedBlock / TopSpeed Paste
Put on thin and work in with FinishKork or SpeedBrush Kork.
After cool down brush exactly with horsehair
brush and finally with BaseBrush Steel MicroFinish.

NanoSpeed FL
Alpin: spray on and wipe the fluid with a clean cloth (CareFleece).
CrossCountry/Biathlon: spray on and let evaporate, work in with FinishKork or SpeedBrush Kork or SpeedFleece.
After cool down brush exactly with horsehair brush and finally with BaseBrush Steel MicroFinish.
A two-time using makes more speed and gives a better durability which is outstanding anyway.